911 2.0-litre / O, A and B series (1964–1969)

911 2.0-litre / O, A and B series (1964–1969)

The earliest editions of the 911 had a 130 PS^[1] (96 kW) flat-6 engine, in the "boxer" configuration like the 356, air-cooled and rear-mounted, displaced 1991 cm³ (cc) compared with the 356's four-cylinder, 1600 cc unit. The car had four seats although the rear seats are very small, and the car is usually called a 2+2 rather than a four-seater (the 356 was also a 2+2). It was mated to a five-speed manual "Type 901" transmission. The styling was largely by Ferdinand "Butzi" Porsche, son of Ferdinand "Ferry" Porsche. Erwin Komenda, the leader of the Porsche car body construction department, was also involved in the design.

The 356 came to the end of its production life in 1965, but there was still a market for a 4-cylinder car, particularly in the USA. The Porsche 912, introduced the same year, served as a direct replacement. It used the 356's 4-cylinder, 1600 cc, 90 hp (67 kW) engine but wore the 911 bodywork.

In 1966 Porsche introduced the more powerful 911S, the engine's power raised to 160 PS (118 kW). Alloy wheels from Fuchs, in a distinctive 5-leaf design, were offered for the first time. In motorsport at the same time, installed in the mid-engined Porsche 904 and Porsche 906, the engine was developed to 210 PS (154 kW).

In 1967 the Targa version was introduced as a "stop gap" model. The Targa had a stainless steel-clad roll bar, as Porsche had, at one point, thought that the NHTSA would outlaw fully open convertibles in the US, an important market for the 911. The name "Targa" (which means "shield" in Italian) came from the Targa Florio sports car road race in Sicily, Italy in which Porsche had notable success, with seven victories since 1956, and four more to come until 1973. This last win in the subsequently discontinued event is especially notable as it was scored with a 911 Carrera RS against prototypes entered by Italian factories of Ferrari and Alfa Romeo. The road going Targa was equipped with a removable roof panel and a removable plastic rear window (although a fixed glass version was offered alongside from 1968).

The 110 PS (81 kW) 911T was also launched in 1967 and effectively replaced the 912. The staple 130 PS (96 kW) model was renamed the 911L. The 911R had a very limited production (20 in all). This was a lightweight racing version with thin aluminium doors, a magnesium crankcase, twin-spark cylinder heads, and a power output of 210 PS (154 kW).

In 1969 the B series was introduced: the wheelbase for all 911 and 912 models was increased from 2211 to 2268 mm (87 to 89¼ in), an effective remedy to the car's nervous handling at the limit. The overall length of the car did not change: rather, the rear wheels were relocated aft. Fuel injection arrived for the 911S and for a new middle model, 911E. A semi-automatic Sportomatic^[2] model, composed of a torque converter, an automatic clutch, and the four speed transmission, was added to the product lineup.

Porsche 911 in hillclimb